Floor Screeding Aberdeen

Floor Screeding Aberdeen Scotland (AB10): A floor screeding professional can level a damaged or uneven floor, help to install underfloor heating or assist with renovations on your Aberdeen property, when necessary. Floor screeding gives a smooth finish to a coarse sub-base, and enables you to lay a suitable flooring material, (boards, carpets, tiles etc) on top of it. If you would like your floors to last then a floor screed is the most important factor in any building or renovation project.

FLOOR SCREEDING COMPANIES ABERDEEN

A dependable floor screeding contractor in Aberdeen will have all the knowledge and experience to help you achieve a perfect floor in whatever shape or size of room you're renovating. They'll be ready to advise you on the correct type of screed your project requires, and how best to apply and install it.

The screeding specialist will also let you know if a structural engineer is necessary for your project, in order to identify flex strength, point loadings and load bearing that your flooring might require to conform with building regulations and British Standards.

A qualified and skilled work force is necessary for a successful outcome and will extend the lifespan of your floor through the use of the right kind of screed for the proposed purpose of your room. There are many types of floor screed and picking the right mix and installation method is critical to create a quality floor that's long-lasting and fit for purpose.

Make sure you get more than one price quote for your Aberdeen based floor screeding project and also ask what standard of finish each quotation is for. For residential properties a quote will normally be provided for a Surface Regularity (SR) level of SR1 or SR2. SR1 is the best level, and whilst SR2 and SR3 may be less costly at first glance, they do not guarantee a perfectly even or flat floor surface. An SR2 or SR3 standard could mean there will be flat spots or ridges that could cause issues when putting down your final floor surface.

British Standards BS8204 sets down the guidelines and regulations that all Aberdeen screeding companies is obliged to follow, and if using specialist screeding solutions, (Flowcrete, Cemfloor, Gypsol etc), they should be certified by the manufacturers as being trained and skilled in their use. This accreditation scheme highlights a contractor's performance and training in the application of a manufacturer's screeding products.

TYPES OF SCREED

Standard Screeds - This is acceptable for normal domestic use and is a combination of sand and cement. The standard screed is a mix of five parts sand to one of cement. After laying a standard flooring screed mix sets at a rate of 1mm/day.

Liquid or Self-Levelling Screeds - When the highest possible standard of finish is needed this mixture of latex and cement is used to produce SR1 quality screeding. Largely used to improve a poor substrate level or damaged floor to enable the laying of a new flooring surface, like tiles on top of it. The liquid screed can be poured to a depth of just one millimetre, but will still provide a high strength base to take a wide variety of flooring materials.

Advanced Drying and Fast Drying Screeds - If you need to progress urgently with the flooring on account of time limitations, this screed dries much quicker than standard flooring screeds. They are normally a fibre reinforced kind of screed that dries out at a rate of between 3-7mm per day and are used in time-sensitive projects.

Polymer Screeds - When a reduced thickness of floor is needed on account of construction factors, a polymer screed provides an extremely high strength solution to this situation. Maker's guidelines for curing times are different across the product ranges.

Industrial and Heavy Duty Screed - Where traffic levels are high or heavy loading on the floor is required, heavy duty screeds allow for maximum durability and strength.

Fibre Reinforced Screed - The favourite choice of professional contractors for use in combination with under floor heating systems. The fibres in this screed increase overall strength and durability while also protecting against thermal shrinkage and cracking. It has a setting rate of one millimetre per day.

SCREEDING PREPARATION AND INSTALLATION

To enable the screeding to be of a high quality finish which is hard wearing and durable, time must be spent on preparing the area before any screeding material is poured. The existing floor surface should be cleaned to remove any grease, oil, debris and paint which can adversely affect the adhesion of the screed.

If any products were used during this stage it's vital to make certain that no residues of detergents, soaps or other cleaning products are left on the surface and it's allowed to dry out naturally. It's necessary to mend any crevices or cracks in the surface to prevent them being visible and "travelling" up into the newly screeded floor. A reputable Aberdeen screeding specialist will take note of these issues during the on-site survey and ensure all preparations are finished before applying the next stages of the screeding process.

A DPM (damp proof membrane) will be put down after the preparation work has been completed to prevent ground dampness getting into the screed and floor materials. Different thicknesses of special polythene could be used as a DPM and also act as a buffer for the screed and any insulation material.

A further air-tight barrier might be required if your property is in an area which is known to be prone to radon gas. This could be as simple as an air-tight membrane, or in severe instances a ventilation and extraction system will be installed beneath the screeding to draw out any inflow of air and gas from the ground.

The final step of the surface preparation process is the painting or spraying of a sealant or primer. Primers assist with the bonding process and are special applications specifically designed for the sort of screed that is being used. These products require qualified contractors to apply them in the correct proportions by using airless sprays and other bespoke equipment.

If you're installing under floor heating, now is the time that it will need to be properly laid out and installed. The cables and heating pipes are securely mounted on insulation panels to prevent any movement and ensure they are positioned correctly. When properly installed an underfloor heating system is an effective way to warm a room and top quality screeding will retain its heat, generating an even level of warmth right across the floor.

Needless to say, if you aren't putting in under floor heating, you can skip this stage and get on with applying the floor screed. Your use of the room will help your screeding specialist on what type of screed is ideal for your requirements. Be aware that even quick drying screeds have a minimum of twenty four hours before you are able to walk over any screeded surfaces and a minimum 72 hours before any flooring can be applied. If you are using heavy duty or standard screeds the drying time is increased and you must follow the manufacturer's guidelines in order to get the best finish for your floor.

The SR level of your screeding can be checked once it has set sufficiently to be walked upon. Using a 2 metre straight-edge the surface is checked for any deviations, dips and ridges in the surface of the screed.

• SR1 - SR1 is the highest level and permits only 3 millimetres of disparity from the straight-edge.

• SR2 - SR2 is the classification for standard floors in industrial and commercial projects and can deviate from the straight-edge by up to 5 millimetres.

• SR3 - If the deviation is 10mm or less the screed quality is classified as SR3 and is suitable for garage and utility areas.

If your screed has been laid with particular loading in mind then a structural engineer is going to be needed to conduct the assessment. The testing will make certain that your newly laid screed is viable for the load bearing requirements specified in the site survey. An assessment called the "drop hammer test" is performed at several areas on the screed and the outcomes documented. Only trained structural engineers heeding the BS8204 guidelines are allowed to conduct these testing and sign off on the structural safety of a screed floor. (Tags: Floor Screeding Aberdeen, Floor Screed Aberdeen, Screeding Aberdeen, Floor Screeding Services Aberdeen).

Floor screeding services are available in Aberdeen and also in: Danestone, Mastrick, Kairnhill, Mannofield, Hayton, Milltimber, Ruthrieston, Altens, Kittybrewster, Nigg, Northfield, Kingswells, Dyce, Old Aberdeen, Persley, Torry, Kincorth, Woodside, and in these postcodes AB10 1FQ, AB10 1JP, AB10 1AG, AB10 1JS, AB10 1NP, AB10 1UZ, AB10 1BU, AB10 1TJ, AB10 1UN, and AB10 1UW. Locally based Aberdeen floor screeders will probably have the postcode AB10 and the dialling code 01224. Checking this will ensure that you access local screeding. Aberdeen property owners will be able to benefit from these and lots of other related services. Just click the "Quote" banner to make enquiries and obtain screeding quotations.

Floor Screeding Tools

• Float
• Wheelbarrow
• Shovel
• Spiked Roller
• Gloves
• Heavy Duty Spirit Level
• Trowel
• Measure
• Straight Edge
• Knee Protectors
• Floor Profiler

Related Tasks

There is a wide range of work that can be undertaken by your local Aberdeen floor screeder including underfloor heating installations, floor screed testing Aberdeen, bonded concrete floor screeding, concrete pumping, commercial floor screeding, floor restoration, cellar screeding in Aberdeen, screeding advice in Aberdeen, self-levelling screeding, cheap screeding, fast-dry screeds in Aberdeen, floor screeding quotations, floor screeding, floor screeding tools, school floor screeding, polished screeding, floor levelling, garage screeding, and lots more floor screeding tasks.

Floor Screeding Near Aberdeen

Also find: Dyce floor screeding, Ruthrieston floor screeding, Altens floor screeding, Mannofield floor screeding, Kincorth floor screeding, Old Aberdeen floor screeding, Woodside floor screeding, Kittybrewster floor screeding, Nigg floor screeding, Northfield floor screeding, Persley floor screeding, Torry floor screeding, Milltimber floor screeding, Kingswells floor screeding, Danestone floor screeding, Hayton floor screeding, Kairnhill floor screeding, Mastrick floor screeding and more. These and other areas are covered by screeding specialists and associated tradesmen and women. Well-equipped with the necessary skills and expertise, these experienced professionals excel in delivering high-quality flooring services. Whether it's for residential or commercial properties, they're well-versed in the art of screeding, ensuring that the work is executed to the highest possible standards. By simply clicking here, screeding quotes are available to local householders.

Floor Screeding Services Aberdeen

Find Floor Screeding in Aberdeen Here

• Aberdeen Screeding Advice
• Aberdeen Fast-Dry Screeding
• Aberdeen Industrial Screeding
• Aberdeen Polished Screed Floors
• Aberdeen Underfloor Heating Installations
• Aberdeen Floor Screeding
• Aberdeen Domestic Screeding
• Aberdeen Screed Calculator Service
• Aberdeen Floor Insulation
• Aberdeen Floor Damp Proofing
• Aberdeen Liquid Screeds
• Aberdeen Floor Levelling
• Aberdeen Screeding Services
• Aberdeen Cheap Screeding

Other Useful Trades in Aberdeen Scotland

Obviously, whenever you are doing home improvements in Aberdeen, Scotland, you'll likely need all kinds of different tradespeople and apart from a floor screeder in Aberdeen, Scotland, you may also need a bricklayer in Aberdeen, waste removal in Aberdeen, a carpet fitter in Aberdeen, linoleum flooring in Aberdeen, a plasterer in Aberdeen, a handyman in Aberdeen, an underfloor heating specialist in Aberdeen, a plumber in Aberdeen, a carpenter in Aberdeen, a heating engineer in Aberdeen, a building contractor in Aberdeen, a floor tiler in Aberdeen, vinyl flooring in Aberdeen, an electrician in Aberdeen, and other different Aberdeen tradesmen.

More: Floor Levelling, Cheap Screeding, Self-Levelling Screeds, Commercial Screeding, Floor Screeding, Coloured Screeding, Cheap Floor Screeding, Screeding Services, Screeding Services, Screeding Services, Cheap Screeding, Screed Reinforcement, Coloured Screeding, Flooring Contractors, Flooring Contractors, Screed Reinforcement, Screeding Contractors, Cheap Screeding, Screed Flooring, Floor Levelling Services, Coloured Screeding, Screed Floors, Commercial Screeding, Screeding Contractors, Coloured Screeding, Floor Levelling, Floor Levelling, Cheap Floor Screeding, Screed Floors, Screeding Services.

If you're interested in local information relating to Aberdeen, Scotland click here

Floor screeding in AB10 area, telephone code 01224.

Underfloor Heating Aberdeen - Floor Screeding Services Aberdeen - Floor Screeder Aberdeen - Screeders Aberdeen - Industrial Screeding Aberdeen - Floor Screeding Aberdeen - 01224 - Floor Levelling Aberdeen - AB10